TP-Link TL-SF1008D 8-Port 10/100Mbps Desktop Switch Price in Kenya

TP-Link TL-SF1008D 8-Port 10/100Mbps Desktop Switch Price in Kenya

The TP-Link TL-SF1008D is a compact switch for adding wired connections to a home office, small shop or workspace. Its eight Fast Ethernet ports connect computers, printers and other Ethernet equipment to an existing network without requiring switch configuration.

It suits installations where 100Mbps connections meet the workload and more ports are needed than a router or five-port switch can provide. Connect it to a configured router, attach your devices and continue managing internet access and addressing through the router.

View the TP-Link TL-SF1008D at Network Switch Kenya and request a quotation confirming the hardware revision, supplied adapter, warranty and delivery arrangements.

Media link

Key Specification

SpecificationDetailsBrandTP-LinkModelTL-SF1008DSwitch typeUnmanaged Fast EthernetEthernet ports8 × 10/100Mbps RJ45Port functionsAuto-negotiation and Auto MDI/MDIXPublished switching capacity1.6Gbps aggregateForwarding methodStore-and-forwardFlow controlIEEE 802.3xCoolingFanlessEnclosurePlasticPlacementDesktopV15 dimensions134.5 × 79 × 22.5mmV15 adapter output5V DC, 0.6AV15 maximum power consumption2.05W at 220V/50HzOperating temperature0°C–40°COperating humidity10%–90%, non-condensingPoE outputNoGigabit portsNoneSFP/SFP+ interfacesNone

Physical and electrical figures follow TP-Link’s V15 documentation; the aggregate switching figure comes from its series datasheet. Confirm details against the supplied revision. The 1.6Gbps switching capacity does not make this a Gigabit switch—each port supports a maximum link speed of 100Mbps. TP-Link Australia

Features and Practical Benefits

Expand Your Existing Network

The TL-SF1008D provides additional connections where several devices need to share a router LAN port or a network wall outlet.

For example, place it near a group of computers and a printer, then connect them through one upstream cable.

One connection to the router leaves seven ports for other devices. Connections to additional switches also consume ports, so include them when planning capacity.

The supplied TL-SF1008D product listing at Tawa provides another reference for this Fast Ethernet model.

Straightforward Operation

The unmanaged design suits users whose main requirement is adding wired connections. Ordinary operation does not need a switch-management interface or controller adoption.

Your router continues handling DHCP addressing, internet access and firewall protection. Choose a managed model if you need configurable VLANs, detailed monitoring or access controls.

Compact and Quiet Placement

The small plastic enclosure is convenient for a desk or equipment shelf. Fanless cooling avoids cooling-fan noise near occupied workspaces.

Keep ventilation openings clear and leave space for cables. Avoid moisture, excessive heat and locations where connected leads may be pulled accidentally.

Support Existing Ethernet Equipment

The switch accommodates compatible devices operating at 10Mbps or 100Mbps. It can serve printers, computers and other equipment whose applications do not require faster connections.

Consider future requirements before purchasing. Faster internet services or frequent large transfers may justify a Gigabit switch.

Where Can You Use the TL-SF1008D?

Home Offices

Connect computers, a printer and other Ethernet equipment through one nearby network connection. Check your internet speed and local-transfer requirements before choosing Fast Ethernet.

Small Shops and Service Businesses

Connect compatible POS terminals, printers and administrative equipment. Follow your business-system provider’s requirements for addressing and application access.

Where payment equipment and guest devices need enforced separation, use an appropriate managed network design.

Small Training Areas

Provide connections for a modest group of computers. Count the teacher’s workstation, printer and router connection when planning capacity.

Simultaneous software installation or access to large shared resources may require faster networking.

Existing Fast Ethernet Networks

The TL-SF1008D can expand an installation whose devices and workloads already operate satisfactorily at 100Mbps.

It is less suitable for heavy shared-storage traffic or large local backups.

Separately Powered Cameras and Access Points

The switch can carry data for compatible cameras and access points, provided they receive appropriate power separately. Calculate combined traffic where several devices share one recorder or uplink connection.

If Ethernet power and network management are required, assess the supplied UniFi Enterprise 8 PoE listing. Confirm its device compatibility, power budget and management requirements separately.

TL-SF1008D and TL-SG1008D Comparison

The supplied Orbitlink Solutions link is for the TL-SG1008D, a separate Gigabit model.

FeatureTL-SF1008DTL-SG1008DEthernet ports88Maximum individual port speed100Mbps1,000MbpsTypical selectionBasic Fast Ethernet expansionGigabit LAN expansionPoE outputNoNo

Specify the exact model when ordering. Choose the Gigabit model if your workload requires connections faster than 100Mbps. TP-Link Australia

How to Set Up the TP-Link TL-SF1008D

1. Prepare Your Equipment

Gather:

• The switch and its supplied power adapter.
• Cat5e or Cat6 Ethernet cables.
• A configured router or an outlet connected to your LAN.
• A stable desktop location.
• Cable labels where useful.
• Backup power if required.

Keep each standard copper Ethernet channel within 100 metres. Inspect damaged cables and plugs before installation.

2. Check the Hardware Version and Adapter

Read the model and hardware-version information on the switch label.

Use the supplied adapter matching the unit’s voltage, polarity and current requirements. Do not substitute an adapter simply because its connector fits.

3. Position the Switch

Place it on a stable surface with room for ventilation and cable access.

Avoid covering the unit or placing it beside equipment that produces excessive heat. Support cable bundles so they do not pull on the ports.

If installed inside a cabinet, use a suitable shelf rather than assuming rackmount brackets are included.

4. Connect Power

Connect the correct adapter to the switch and a suitable mains outlet. Check that the power indicator illuminates.

For continued operation during outages, include the router and essential connected devices in your backup-power plan. Keeping only the switch powered will not preserve internet access if the router shuts down.

5. Connect the Upstream Network

Connect a router LAN port or a correctly connected network wall outlet to an available switch port.

The router should already provide working internet access and, for a typical home or small-office setup, DHCP addressing.

A Gigabit-capable router will connect to this switch at a supported Fast Ethernet speed. It cannot increase the TL-SF1008D’s port speeds beyond 100Mbps.

6. Connect Your Devices

Attach computers, printers and other Ethernet equipment to the remaining ports.

Devices requiring PoE need suitable separate injectors or a PoE switch. The TL-SF1008D does not distribute power from an upstream networking device.

7. Confirm IP Addressing

Set computers to obtain addresses automatically if your router provides DHCP.

Use DHCP reservations or a suitable static-address plan for equipment needing consistent addresses. Avoid duplicate IP addresses.

The switch does not require a management IP address for ordinary unmanaged operation.

8. Check Connection Speeds

Check the link indicators and the negotiated speed shown by a connected computer.

A 100Mbps connection is normal for this model. If compatible equipment connects at only 10Mbps:

1. Try a known-good Ethernet cable.
2. Inspect the plugs and wall-outlet terminations.
3. Check the network adapter’s capabilities and settings.
4. Test another switch port.

Leave automatic negotiation enabled unless a specific troubleshooting requirement justifies changing it.

9. Test Network Access

Confirm that a computer can reach the router, access the internet and communicate with permitted local equipment.

Test printing or the required business application. Use a local transfer between suitable endpoints when assessing LAN performance.

Internet speed tests measure the upstream service as well as the local connection.

10. Avoid Cable Loops

Do not connect switch ports directly back into one another. Avoid duplicate paths between switches unless the network is designed to support them.

Use one planned uplink for a straightforward installation and label it clearly.

Advantages

• Useful port count: Seven device ports remain after one uplink.
• Simple installation: Requires little configuration.
• Compact format: Convenient for small workspaces.
• Quiet operation: Fanless cooling avoids fan noise.
• Practical for existing equipment: Suitable where Fast Ethernet meets the workload.

Disadvantages

• 100Mbps port limit: Restricts faster internet access and large local transfers through the switch.
• Shared uplink capacity: Devices using one router connection share its available bandwidth.
• No PoE: Cameras, phones and access points need separate power.
• Limited management: No configurable VLANs or detailed monitoring interface.
• No fibre interfaces: Direct SFP connections are unavailable.
• Desktop enclosure: Requires suitable placement rather than standard rack ears.

For higher-speed networking, compare the TP-Link TL-SG1008D 8-Port Gigabit Switch. If more Fast Ethernet connections are needed, consider the TP-Link TL-SF1016D 16-Port Desktop Switch.

Package Contents

TP-Link’s documentation lists:

• TL-SF1008D switch.
• Power adapter.
• Installation guide.

Confirm the supplied package, adapter rating and regional plug type. Ethernet cables and the router should be budgeted separately unless included in your quotation. static.tp-link.com

Frequently Asked Questions

Is the TL-SF1008D a Gigabit switch?

No. Its ports support 10/100Mbps. The TL-SG1008D is a separate Gigabit model.

Can Gigabit-capable computers connect?

Yes, where their adapters support negotiation to 100Mbps. They will operate at the switch’s supported speed.

Can I connect eight computers and a router?

The router connection uses one port, leaving seven for computers or other equipment.

Does it provide Wi-Fi?

No. Wireless access requires a separate access point or wireless router.

Can it power an IP camera?

No. Use a suitable separate power supply, compatible injector or PoE switch.

Does full duplex mean a 200Mbps connection?

A 100Mbps full-duplex link can send and receive simultaneously at up to 100Mbps in each direction. It does not provide a 200Mbps one-way connection. TP-Link Australia

Order the TP-Link TL-SF1008D in Kenya

Expand connectivity with the TP-Link TL-SF1008D 8-Port 10/100Mbps Desktop Switch from Network Switch Kenya.

Request a quotation confirming the hardware revision, adapter, warranty and delivery arrangements. Browse Network Switch Kenya for Gigabit, managed and PoE alternatives.